🔧 How to Install a Gold Coin into a Screw-Top Bezel (No Jeweler Needed)
Want to turn your gold coin into wearable jewelry? Our screw-top bezels make it easy to do at home. Follow this simple, step-by-step guide using basic tools you already have.
🧰 What You’ll Need:
- Soft cloth or towel (to protect your surfaces and coin)
- Small flathead screwdriver (eyeglass screwdriver is perfect)
- Optional: Cotton gloves (to avoid fingerprints on your coin)
âś… Step-by-Step Instructions:
1. Prepare Your Workspace
Lay a soft cloth on a flat surface. This helps prevent scratches to your coin or bezel while working.
2. Unscrew the Bezel
Locate the tiny screw near the top of the bezel (next to the bail/loop). Use your screwdriver to gently remove it. Set the screw aside safely.
3. Insert the Coin
Gently place your coin into the bezel. Make sure it’s centered and facing the right direction—front side out. Most coins fit snugly by design.
4. Reattach the Top
Place the top ring of the bezel back in position, align the screw holes, and reinsert the screw. Tighten it slowly and gently. No need to overtighten—just enough to secure the coin firmly.
5. Check Your Work
Make sure the coin is seated evenly and doesn’t rattle. If it seems off, loosen slightly, adjust, and retighten.
đź’ˇ Helpful Tips:
- Always handle your coin by the edges to avoid smudges.
- Work over a soft surface in case you drop anything.
- No power tools—hand tools only!