Will your chain fit?
Check the chain AND its end fitting. Both need to pass through the loop at the top.
Illustration only. Bail shapes and openings vary by bezel.
Most chains around 2–3 mm wide tend to fit.
Based on our experience with most of our bezels, this is a useful starting point, not a guaranteed fit. Larger or unusually shaped end caps and clasps may not pass through the bail.
- Check the chain width.
- Check the widest part of the end fitting or clasp that must pass through.
- Compare both with the inside bail opening, leaving room to slide through.
My chain is wider than 3 mm, or I am not sure.
Some larger bezels accommodate larger chains, but a larger coin does not necessarily mean a larger bail. Contact us with the bezel you like and your chain and end-fitting measurements before ordering.
What if my chain does not fit?
A local jeweler may be able to gently adjust, modify, or replace the bail, depending on its construction. Do not force the chain through or assume every bail can be enlarged. Contact us before altering an item you may want to return.